Carbon fiber dual lens motorcycle

Product Introduction

Carbon fiber mounted police helmet is used for head protection of mounted police; Adopting the latest technology shell, the product is made of fiberglass and carbon fiber materials. Carbon fiber is made from raw materials such as polypropylene fiber, adhesive fiber, asphalt fiber, etc., and is made by high-temperature carbonization and graphitization. It is a high-strength fiber material with a carbon content of over 90%, which has the advantages of light weight, high strength, and good comprehensive protection performance.

Helmet design highlights:

1. Full Helmet: Fully enclosed for use, the face mask can be opened.

2. Face shields and goggles can be quickly released and locked; The goggles can be lifted up or retracted; With just one click, you can easily switch the opening and closing of the goggles, making the operation simple and convenient;

3. There are ventilation holes on the forehead and chin for breathability and ventilation; The internal pads and ear pads can be replaced, washed, and kept clean and hygienic.

Technical parameters:

1. Helmet shell material: carbon fiber material;

2. Face mask and goggles: The face mask is made of 2MM scratch resistant polycarbonate material injection molded; The goggles are made of PC material with a light transmittance of not less than 90%;

3. Collision absorption layer: high-density EPS; Thickness of 31-40mm. It has buffering performance and can absorb more collision energy;

4. Comfortable pad: PU-FOAM (foam sponge)/polyester, thickness 8-12 (ear liner 20-40)/0.5-1.5mm. Made of non-toxic and harmless materials to the skin, it is comfortable to absorb sweat, breathable, and ensures the comfort of wearing the helmet.

5. Wearing device: Double layered nylon chin strap with a width of not less than 20mm, with sufficient adjustment allowance to prevent the strap from loosening. Quick release buckle, easy to open method; Apply a force of 100N ± 5N to stretch the buckle after wearing, and the buckle should not break or loosen, and can continue to be used;

6. Helmet field of view: horizontal field of view on both sides ≥ 105 °, upper field of view ≥ 7 °, lower field of view ≥ 45 °;

7. Helmet penetration resistance: Drop a 3kg steel cone freely from a distance of 3000mm ± 5mm and test twice. The distance between the test parts should not be less than 75mm, and the steel cone should not penetrate the helmet.